Slurm! - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA PolyLite Pro Pink Transmission Distance: 3
PLA PolyTerra Lime Green Transmission Distance: 1.5
PLA JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Pink
At layer #18 (1.52mm) swap to Lime Green
At layer #23 (1.92mm) swap to White for the rest.