CR-5 Pro H Heat sink fan duct
Ask to improve the cooling of the cr-5 pro h heat sink. Print on PET-G/ABS, ASA, PP, NYLON.... No supports needed.
2
56
0
383
updated October 4, 2023
Description
PDFThe model replaces the original version which causes a lot of cloging due to not cooling sufficiently. Unique ventilation increases the printer's filament volumetric capacity by up to 25%.
Can be printed on PET-G, ABS or superior materials, PLA is not recommended.
The design was designed to not use screws or permanent fixing.
It is necessary to remove the original metal protection to use the modification.
Tags
Model origin
The author marked this model as their own original creation.
