No Supports Qube 500 Accessories

Supports waste your precious filament! Don't use them! Print these Qube 500 accessories instead!

These models are oriented for optimal strength and appearance and print with absolutely no supports needed.

All the models here use the Twist-Lock Accessory Mount system https://www.printables.com/model/596210-twist-lock-accessory-mount-for-the-qube-500

Print one Twist-Lock Accessory Mount for every socket on the models you print.

Due to the small size of the Twist-Lock Accessory Mounts I recommend printing them with a 0.4mm nozzle and 0.2mm layers. Most materials should work including PLA, PLA+, and PETG. 

If you want to start using this system but don't have a Qube 500, check out this modular wall storage system: https://www.printables.com/model/590663-quall179-a-modular-storage-wall-panel-compatible-w

File list and descriptions:

• Sharpie Clip. Holds one standard Sharpie marker. Print one Twist-Lock Accessory Mount.
• Simple Hook. Print one Twist-Lock Accessory Mount.
• Screwdriver hangers. Large holds 4-in-1 type combination screwdrivers with up to a 12mm diameter shank. Regular holds standard screwdrivers with up to a 6.4mm shank. Small holds small screwdrivers with up to a 4mm shank. Print one Twist-Lock Accessory Mount for each hanger. 
• Headphones Hanger. Should accommodate headphones with up to a 50mm wide band. Requires two Twist-Lock Accessory Mounts.
• Split Hook. Hang a t-square or a small hammer or trowel. Requires two Twist-Lock Accessory Mounts. 
• Folding Rule Mount. For a wooden folding rule 2 meters long. Print four Twist-Lock Accessory Mounts.
• Small Container. Hold your extra Twist-Lock Accessory Mounts or what-have-you. Requires two Twist-Lock Accessory Mounts. 
• Large Container. Hold bigger things. Sockets for six Twist-Lock Accessory Mounts, but only two required depending on how much weight it'll need to hold. 
• Deep Container. Good for long things like pencils. One or two Twist-Lock Accessory Mounts. 
• Caliper Mount. Keeps your calipers handy. Flip it over and print on it's face if you are confident in your printer's bridging. Sockets for four Twist-Lock Accessory Mounts, but two will probably suffice. 
• Ruler clip. Should securely grip rulers between 2mm and 4mm thick. Two Twist-Lock Accessory Mounts.
• Scissors hanger. Requires two Twist-Lock Accessory Mounts.