HueForge Shiny Cramorant clock

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Matte Scarlet Red Transmission Distance: 2

Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Lemon Yellow
At layer #9 (0.8mm) swap to Charcoal
At layer #16 (1.36mm) swap to Ivory White
At layer #17 (1.44mm) swap to Scarlet Red
At layer #19 (1.6mm) swap to Lemon Yellow
At layer #21 (1.76mm) swap to Ivory White.
At layer #23 (1.76mm) swap to Charcoal for the rest.

The clockwork that was used in this project is: https://www.amazon.nl/dp/B09S3B67VW?psc=1&ref=ppx_yo2ov_dt_b_product_details .

Frame for this clock: https://www.printables.com/model/600624-frame-for-the-shiny-cramorant-clock 

Simple stand: https://www.printables.com/model/600628-simple-stand-for-clock 

You will have to make a cutout for the clock mechanism. I used a negative cilinder with a diameter of 9 mm. If you have a Bambu Lab printer and download the 3mf file, it should already have this (as well as the color changes). You can still adjust the diameter if you use a different clock mechanism.