Joystick Gamepad Retro Arcade for PC (USB-C) and C64 / C128 / Amiga Projekt Joyweiler

Hello,

this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display.

Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project: https://gitlab.com/edge-records/joyweiler

This housing was specially designed for this project. The parts lists and instructions can be found on the Github page. Since not all components of the parts list are required in the printed housing. Please check again whether the component is required before ordering.
These screws are required for assembly:

3x Allen screw M2x5

4x Allen screw M3x6

6x Allen screw M3x12

In contrast to the parts list, I used this display: https://www.reichelt.de/arduino-display-grove-4-zahlen-tm1637-grv-4num-display-p191185.html

the joystick and the buttons were ordered here: https://www.amazon.de/gp/product/B089QK44BY

I will also design a case for this set.