LISN-mate case

This design is for a case for a “LISN mate”. In particular, a LISN-mate for a dual channel LISN, and more concretely, for the dual DC LISN published in Elektor.
 

The design for the PCB and additional documentation is on GitHub: https://github.com/compuphase/LISN-mate.

The top and bottom shells of the case snap together. No glue or screws are needed.

The case is printed in Prusament PLA “Vanilla White”. I used label tape for the text (the text is not 3D printed).

Acknowledgement:

This project use the "Chamfered primitives for OpenSCAD v1.2" by "TimeWaster", which is published (on GitHub) under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 licence.