Flatbox V5 Large Enclosure CNC

CNC version, ordered for JLC PCB but I imaging it'll work with any companies out there. 

Follow the direction on https://github.com/jfedor2/flatbox/tree/master/hardware-rev5 for ordering.

The finishe I used was 

“Bead blasting-100 mesh + Anodizing-Champagne/Black-Glossy”

Could be a bit nicer, maybe add hand polishing before the bead blasting if you're after a super even finish.

Order was about $120 total, I used the v3 file but realized I forgot to chamfer the holes for the tactile button. Some one let me konw if that added to the cost of manufacturing please!

I used m3x8mm flat heads for the fastener.

And 8mm tall tactile switch for the buttons.

Remember to use the pdf file to indicate threaded holes when ordering.

Thank!

larger size, different edge finish