The Cylinder LED Lamp

I saw this lamp and decided I wanted to make it BIG. https://www.instructables.com/RGB-Lamp-WiFi/
18
50
0
504
updated March 9, 2021

Description

PDF

I totally loved the lamp by Nikolaos Babetas that can be found here so I made it BIG. I simplified the design by only using 3 components instead of using the battery system so what you'll need is:

  • 1x D1 Mini aka ESP8266
  • 1x TP4056 USB power (either USB C or micro USB will work
  • 50 WS2812B 5V neopixels
  • some 20-26awg wire
  • soldering tools

Image of wiring included just make sure you are not powering the LEDs with the D1 Mini because it will become a resistor and get hot. 

Printing Guide:

All parts minus the dome should be printed with 0.45mm layer widths and 0.2mm layer height. The dome should be printed in Spiral Vase mode with 0.55mm layer width at 0.2mm layer height and 6 bottom layers. 

Tags



Model origin

The author hasn't provided the model origin yet.

License