Hexagon Superfidget V2 - 45 Segment PIP Design

Thanks! Printed one for my desk and everyone loves it.
Had to use a raft as couldnt get it to stick on my printer.

The medium looks very cool with the three colour Silk PLA.

I started out printing the large version, it was too large for the build plate so I scaled it down to 85%. This is the result, I feel like I would have been better off doing the medium so I may print that next. I used Flashforge Rainbow PLA apparently at the right color change point to get a dual color model. It's really quite satisfying and look forward to printing the other sizes!

Elegoo black pla with some yellow glow in the dark I had (edited)

Really cool!

Neptune 4. Will tri color. 0.4 nozzle, 0.2 layer.

Printed a medium size, works great!

Small one printed great with height scaled to 10mm. Will try medium size tomorrow.

Material: Prusament PETG Chalky Blue

Used some glow in the dark filament. Came out lovely!

Printed it in PETG. Very satisfying to play with, I like the noises it makes. Thank you!