I present to you my articulated Pikachu
It is 100% articulated, it can be put in different positions.
It prints in place, with support. It is compatible with PLA.
For a perfect multicolor print, you need 5 colors (yellow, black, white, brown, red)
_________
Personally I printed it in 0.2mm
Support needed, three are OK
An infill of 15-20% is recommended for strength.
There is no need for a raft or edge, a well-adjusted deck is enough.
_________
There are two ready-to-paint versions for Prusa MMU and Bambulab
The author marked this model as their own original creation.