I liked the original clip, but found it to be bigger than my needs. You can not simply scale down the model and print naively, since this will also scale down the size of the spacing between the prints, resulting in a fused print. My STL files are for the same clip at 50% and 70% of the original size, while maintaining an approximately .4 mm gap between the teeth.
Even with a .4 mm gap between the teeth of each model, I still needed to pop mine apart first before using.
The author remixed this model.
I scaled the clip to 50% and 70% of the original size, and modified to maintain an approximately .4 mm gap between the teeth.