Meowth Team Rocket pose

Here is my Meowth model with his Team Rocket pose.
For a perfect multicolor print, you need 6 colors (yellow, black, white, brown, Gold and pink) but if you are on MMU you can replace the brown with Gold after printing the brown to have the same result.

_________

Personally I printed it in 0.2mm.

Support needed 
An infill of 15-20% is recommended for strength.
There is no need for a raft or edge, a well-adjusted deck is enough.

_________

There are two ready-to-paint versions for Prusa MMU and Bambulab

There is a 3mf version already colored for Bambulab and MMU