Qube 500 EK-Quantum Kinetic TBE 200 D5 PWM D-RGB Mount

An easy way to mount you water cooling on the outside of your computer case.

You need to print two Qube 500 EK TBE 200 Mount. They need to be mounted according to the 2 where the mounting holes are places away from the center. They can be mounted with the M4x10 DIN7984 screws that comes with the pump or at least a M4x6 DIN7984.

There are added a hose clamp for OD16 mm. Normally 4-6 should be sufficient but that depends on how your pipe/hoses are routed. 

In the gcode there are 4 clamps and two mounts.