CooliPi 4B HAT and FAN mounts

Frames for mounting large HATs and a FAN to the CooliPi 4B heatsink/case combo.

See more info at www.coolipi.com
Shop at www.sensoreq.com

Print instructions

These are mounting frames for a Raspberry Pi model B case named CooliPi 4B CASE, for use with a real aluminium heatsink sold by www.sensoreq.com

If you have Prusa i3 MK3/S, 0.4mm nozzle diameter, you can use the gcode directly. Print material PETG. Not tested with other materials. Exported with 100% fill.

You may use the 3mf project and change any other print parameters, including material, but be aware of the scale factor - thermal contraction may be different.

The parts are increased by 0.3% in slicer because of thermal contraction of PETG after cooling. Fine tune yours. Not critical though. 0.3% was ok for PETG for us.

In other words, gcode has the 0.3% increase in it.
The 3mf project has the 0.3% increase set for this part.
Source STL files are in nominal dimensions.

Print orientation is visible on the pictures. No supports needed.

This is to be used only with a CooliPi 4B CASE with a aluminium heatsink from www.sensoreq.com, or you can print a mockup of that heatsink first, to evaluate its size and aesthetic. It's in the collection under CooliPi 4B heatsink MOCKUP name.

See more at www.coolipi.com . Source files are in Download section in the menu.
Shop at www.sensoreq.com