Perfect.
More stable tablet stand
I remixed the model for more stability!
79
302
4
1483
updated September 21, 2023
Makes
Comments
Ok, I've found your Remix :) Did you used a flexible material for the Orange accent? I've tried on the original model with a petg material but it does not fit.
I will print your model, hopefully will not flex as a trambuline... :)
@Boshimanu_751064 hi! the accent i used is simple pla, i just pushed it in with one of the arms :) it's not easy but friction holds it in place so! ^^,
good luck!
if it doesn't fit try elephantphoot compansation for the first layer to open up that channel a bit :)
Printed in PETG. While it is stable, the upper joint is too weak to hold a somewhat large tablet. This is part of the original design, so can't blame you for that :).
Perhaps PETG is too slippery, or the design is just not that great. I'll have to look at the other remixes to see if I can still make this one work.
I planned to give it as a gift to my father later today, but now I'm quickly printing a small Einstein as a plan B.
View 2 more comments
@Julius oh my, i didn'h have the problem at all :O printed it multiple times with PETG and PLA, maybe something with you settings? i dont know but im really sorry fot that :(
@NeverCountry for nuance. My father doesn't care much for gifts, and it's 100% on me to be so last minute with printing a gift.
I think the small circular things (don't know the English word) didn't print perfectly. Combined with that my Petg could be a bit slippery.
Experimenting with scaled down models (green is 30%, white is 50%) while I wait for my filament order to arrive. Will be printing a couple as gifts, so I need to make sure everything is perfect. :)
