Fanatec Clubsport SQ H-shifter side bracket

Bracket which mounts to the side of the Fanatec H-shifter, for attaching a small shelf to it.
11
41
0
430
updated October 7, 2023

Description

PDF

Two of these brackets can be attached to the side of the Fanatec shifter using the T-nuts which come with it. This allows a small shelf to be mounted on top of the brackets. The shelf could be made of wood (which is what I did) or optionally printed. I'm using the shelf to hold a mouse for controlling menus in some simracing games, but you could put a cup holder in the shelf or whatever you like. The sky's the limit 😄.

 

Additional items needed:

  • Shelf (wood or plastic), 11x15 cm is minimum size, can be bigger. I use 14x21 cm.
  • T-nuts with 5x10mm bolts - should come with shifter
  • Some kind of 3-4mm diameter screws approx. 20 mm long for mounting the shelf (length depends on thickness of shelf).

 

Print settings

I used ABS with 0.3mm layers, 4 perimeters, 23% infill. Use enough infill to support the weight you plan to put on it.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more