Printed Socket for ESP-12 / ESP-12e / ESP-12f / ESP-07

Printed socket for ESP8266. 

I am using it to place ESP in PCBs. It can be used also in breadboards, just be careful when inserting it.

Pins are to be added curving copper cable without any plastic cover. 
Cable wire has to be bended as a letter U and inserted hole by hole. 

Cable wire is intented to be large enough to be used as pin connection.

The wire that goes inside has to be cut flat to socket.

Printed in recycled PET 0.2mm layer , 20% infill.

I expect PLA to work OK.

Take care of horizontal expansion not to close holes.

Added perforation for cables acting as pin connection.
Model is much higher.