The author remixed this model.
https://www.youtube.com/channel/UCBjyI1E1HROh1BAYgeRZy7g
Support my work: (click on image)
https://www.buymeacoffee.com/savagelau
You can get commercial license from here: (click on image)
https://www.patreon.com/SavageLau
______________________________________________________________________________________________________________
This is a remix of two models:
Low Poly Skull. By: Peter Farell
https://www.printables.com/model/552954-low-poly-skull
Sitting Crow By: DragonArtist15
https://www.printables.com/model/220718-sitting-crow/files
Thanks for the awesome work and share with us!!
All models were tested and revised many time to meet my own standard before I upload it.
I made some overhang improvement over the LowPoly Skull to make it easiler to print. Well still requires support to print tho.
I also have convert the Crow to Low Poly verizon to make it more cohesion look with the low poly skull. But I still want to keep most of the detail of the Crow, so I made it lowpoly, but not very low. So all the detail is there. Also there are refinement done on a lot place to make it eailer to print.
You will need support! The tail part of crow will need a lot of support.
Bambu Studio setting for you references: