The titla says it, this is an x carriage that allows you to use the Voron toolhead ecosystem on a Prusa. The carriage has been modified from the Voron Legacy x carriage.
You will need Bear x ends to use this - https://github.com/gregsaun/bear_extruder_and_x_axis
I repeat, stock x ends will not work because of the belt path. If you use stock X ends, your x moves will be nonlinear.
BOM :
IMPORTANT UPDATE
Make sure you print the x carriage and x ends in the same material. This helps prevent misalignment, increasing axis precision and prolonging bearing and rod life.
Licensing and attributions:
Licensing on this model is a bit complicated. The cable tail has been reused without modification from the Skelestruder project : https://www.thingiverse.com/thing:2845416
Thus, the tail is licensed under Creative Commons - Attribution.
The rest of the models are licensed under GNU GPL v3.
The x carriage has been modified from the Voron legacy parts : https://github.com/VoronDesign/Voron-Legacy
I would also like to give credit to the Afterbearner (https://www.prusaprinters.org/prints/54545-afterbearner-the-prusa-bear-afterburner) which is basically the same thing. My aim was to recreate what was done there, but without changing the X ends and with cleaner, easier to edit cource files.
The author hasn't provided the model origin yet.