A4 Sized Large Under Desk Drawer

This is a generously proportioned desk drawer that fits an A4 notepad

Features

• Clean minimalist front
• A4 notepad-sized interior (222mmx313x47)
• Hidden handle
• Prints on MK3-sized bed
• No supports are required. I printed the back with 2 helper disks - just in case
• The limiter stops the drawer from falling out
• Tray Insert (use with the Tray version of the Drawer Front)
• Bonus - locking limiter stops causal snoopers
• Attaches to the underside desk with 4 small screws (≤4mm)

Assembly

1. On a flat surface assemble the front and the back of the drawer
2. Push-fit 2 locking pins
3. Fix the Bracket to the desk underside allowing for at least 30mm clearance behind the bracket 
4. Slide-in drawer and then push-fit the drawer limiter

Bonus optional locking limiter

With the drawer fully open, push out the standard limiter using the hole provided and drop in the locking limiter. Lift the limiter slightly to move the drawer between the fully open and fully closed positions. The locking limiter is smaller than the standard limiter to allow it to automatically drop down to lock the drawer into position.