Toilet Paper Holder V3

Is there toilet paper sitting on top of a shelf in your bathroom, because you do not want to go buy a toilet paper holder. This easily printable, toilet paper holder allows you to get your toilet paper off the shelf and onto the wall with just four screws. This toilet paper holder is based off the traditional type with a removable middle.

Required Parts

• Left and right toilet paper mount legs (included)
• Toilet paper holder middle connecting piece (included)
• 4 screws (5 mm shaft diameter, 10 mm in diameter head and 5 mm thick head) (not included)
• 4 drywall anchors for the screws (not included)

Assembly

• Pick the file with the tolerance your printer needs and print it
• Assemble the toilet paper holder by placing the legs and middle together
• Placed the assembled toilet paper holder on the wall
• Mark the holes in the toilet paper holder on the wall
• Put the drywall anchors in the wall where the marks are
• Screw the toilet paper holder into the drywall anchors
• Ensure that the whole to place the middle in is on top

Printing Instructions

• Material: PLA or PETG for extra strength
• Supports: No
• Orientation: The legs should be printed on the face that would normally be facing outward when assembled. The middle piece should be placed on one of its sides.

If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.