Stable table (configurable)

You can print the table all in one without any support, BUT this table isn’t very stable. The legs can break off. The file MyTable_AllInOne.stl is for this purpose.

If you print the table top and the legs separately you need some support for the legs and you have to glue the legs to the top. BUT this is very stable. The legs can't break off.
The files MyTable.stl, MyTable.3mf and MyTable_0.2mm_1h12m.gcode are for this purpose.

With the OpenSCAD file MyTable.scad you can generate the stl-files in nearly every size.