Simple Tray with Lid (Parametric)

No matter the organisation systems we buy or print for ourselves, there's always things laying loosely next to the printer. Well I made a tray to put that stuff in, and once it overfills I'll know that it's time to use the lid as a second tray. BUT when that also overfills then it's time to tidy up!

It's a parametric model so change “Width”, “Depth”, and “Height” for different sizes. I printed this with a 0.6 nozzle and the wall thickness is following my own slicer settings so feel free to play around with that as well.

Uploaded STLs are just under 18cm deep, 10.5cm wide and 2.1 cm tall.

Note: Not a vase mode print! I prefer slightly thicker walls and I like some rounding at the edges so that I can scoop up bits, screws or filament strands.