Wacom One Cable Repair Clamp

Our Wacom One tablet is used extensively with a laptop.   It is constantly moving around.   For the first few weeks the cable connector holds, then it starts to loosen.  Eventually you must hold the cable connector for the tablet to work.  If not held, the tablet disconnects.

I made this Wacom One Cable Repair Clamp to fix this problem.  This clamp holds the cable in place keeping the tablet connected even when moved.   It also minimizes the stress and wear on the connector.   

It is designed to slide on to tablet past the connector area.  Then the connector is pluged in and the clamp slides back over the connector.  There is a closed area on the clamp that stops the clamp from sliding past the connector.  See the pictures.  

I used PETG.   15% infil, 0.2mm layers.  Default settings.