Shaun the Sheep

Figure of this famous sheep, super nice and very crazy. Most of the parts are supported, I have used PETG for the top interface of the support. Layer height 0.2, 2 perimeters, 10% infill and speed that of the Bamboo profile. Printed in recycled white PLA from #smartmaterials and Carbon Black PLA from #Eryone, a height of about 26 cm.

In principle I have separated each part, I have cut the head in a straight cut at the top to be able to print it upside down, since its shape made it more difficult to print, the white wool of the head has just the right gap to fit perfectly into the head, the legs I have widened the holes so that they can fit comfortably into the body, as well as the arms, the eyes I have made the anchoring area and I have joined the white and black part of it to print with the AMS or the MMU, I have changed the pieces that make up the teeth for more correct ones, since the originals were very damaged, I have created the base and pins to keep it standing.