Very good test for cooling. I scaled 70% for better results. I am testing my sonic pad and i printed with 160mm/s and 80mm/s. Both models are with standard fan. I'm waiting for the 5015 fan and will compare the results.
3D Printers Testing Print Set (UPDATE V3)
These are the test prints to clearly show the performance difference between 3D printers
62
630
6
2014
updated October 8, 2024
Makes
Comments
In your recent videos where you test layer adhesion I see the rounded square with thinner middle region and wider top/bottom for better grips in the aluminium holders. Have you published that model? it's not the one available here
I'd like to use the same model as you now that I have a scale with auto peak-hold.
Testing out my new turbo nozzles. https://www.printables.com/model/700368-frank-20-satsana-nozzle-remix-v2
Pretty nice results.
Can't vouch for other models, but overhang test is really good! Using to improve my cooling ducts
very usefull test