Voron Trident mini purge bucket

The purge buckets for Vorons I found were mostly integrated with a nozzle cleaner brush, fixed to the bed frame, but I wanted to have a brush that is fixed to the printer frame, to avoid the need of raising the bed when a nozzle wipe is needed mid-print (i.e.: pause because of a filament color change). 

Due to TAP, my nozzle has minimal clearance to the back of the bed (approx. 1mm), so it is only possible for me to use a bucket that is fixed to the bed frame, under the bed. I did not find any I liked, so I created one. Note: it will interfere with the endstop button, provided there is one. With TAP, I do not have an endstop button.

The mount is fixed to the bed frame using M3x8 screws and T-nuts or hammerhead frame nuts, while the bucket is secured using standard 6x3 magnets (mind the polarity when gluing them to their place in the mount and in the bucket).

For the brush, I used the “Voron Trident fixed Nozzle Scubber” by Lu123:

https://www.printables.com/model/413177-voron-trident-fixed-nozzle-scubber