PCB vise

If you like the design and can afford it consider buying the original https://www.stickvise.com/ .

Printing recommendations

All parts should be printed on sides.

Additional hardware required:

• M5x20 shoulder bolt - 2  (M5 thread, 6mm round part, 20mm round section + 10mm thread section) 
• M4x16 screw - 1
• M3x10 screw - 1
• M3x16 screw - 4
• M3 nut - 5
• M4 wing nut - 1
• 200 mm round rod d=5-8mm adjust parametric model accordingly, aluminum is fine
• springs - 2
• jaws - 2 (there are a bunch of existing 3d printable models for those)