Specifically for Hub75 5mm pitch matrix panel model# P5(2121)-3264-16S-M5
Panels can be purchased from Adafruit
Use M3 threaded bolts (recommend M3x10mm with M3 washers)
Printer: Ender 3 S1 Pro
Filament: black Polymaker PolyLite PLA
Printer Settings: 75% fan / 215C nozzle / 60C bed temp / 60mms / .32 layer height
Quad bracket: 2.5 hours on .8mm nozzle
Mid bracket: 1.5 hours on .8mm nozzle
End bracket: 1.2 hours on .8mm nozzle
Top-Bottom bracket: 1.2 hours on .8mm nozzle
The author marked this model as their own original creation.