MMU Slot buffer mount for LACK

I published this on thingiverse years ago (Sorry Joe!) and just realized I never ported it here to Printables - so here it is now.

I really like the MMU Slot Buffer from mar_jer ( https://www.thingiverse.com/thing:4311235/ ).  This mount is designed to go on the side of a LACK enclosure (v1) to work with a top-side mounted MMU.

I purposely did not put a screw in the top of the "arm" because I wanted to be able to lift off the top LACK table without having to remove the buffer mount.

After working with this a bit more, I think I would like to add a lip in the "back" so the buffer can't be pushed back. 

Please refer to the picture for the correct printing orientation.

This is almost 290g of filament at 15% infill and was a 12 hour print for me.

Rafts:  No
Supports:  No
Resolution:  200
Infill:  15%
Filament brand:  Prusament
Filament color: Orange
Filament material:  PETG