Designed by my son for his wife's brush that got partially crushed while traveling, and posted here with his blessing, this is a protective hard shell case for the Revlon One Step drying hair brush. Print in your favorite material. There are some pretty severe overhangs, so make sure your cooling is on point. The clip is printed separately, on it's side, for strength, and is glued in place after the case is printed. Use an appropriate glue so that it adheres well. 3D Gloop is a good choice. The hinge is printed in place, so no need for hardware or assembly other than gluing the clip on.
The author marked this model as their own original creation.