We tend to take feet for granted until we lose them.
Replacement pad/foot for a Harbor Freight 4" ratcheting bar clamp.
Print slot side up without supports. There are supports built in. Pry off the supports after the print with a pick or other small tool.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes
Print with 100% infill or with 1mm or thicker shells for a solid part.
Print without supports. There are supports built in. Pry off the supports after the print with a pick or other small tool.
The author marked this model as their own original creation.