Solder Spool Holder for Honeycomb Storage Wall

A simple design to hang your spools of solder on your Honeycomb Storage Wall, without taking up too much plastic or space.

Known Compatibility:

Using my referral links helps keep me publishing free designs for everybody to enjoy, or feel free to leave me a tip on my Ko-fi if you like my designs.

Originally designed to hold my spools of Solder, the 3mm variant holds my Yihua Lead Free Solder spools, but will hold most spools that have a 2-2.5mm thick side-wall on the spool, and diameters between 50 and 65mm.

The 6mm variant holds my 8oz spool of Sterling Solder, and works for the same 50-65mm diameter range.

The height of the spool doesn't matter, as it just holds onto one wing of the spool, but the weight of the spool might - I don't have a 1lb spool of solder to test compatibility with right now, so YMMV.

Both of these models need one “insert-empty” from the original HSW models. (download link)

About this model:

The dimension in the model name is about how deep the lip on the part is, and the other major dimensions are shown in the images.

If you have a spool of solder with a different lip thickness, just leave a comment and I can make a new version of this model to fit your needs.

Print it with 2+ walls and 0.2mm layer height. Prints in ~20 minutes, plus the empty insert to mount it.