The model is great thank you.
I hope not to detract from that in any way. My issue is really just that the downloaded files are Gcode only. Including the STL’s would allow for easier to change the bed position, print settings for filament an nozzles etc.
[v2 abailable!] ATC Flight Progress Strip System
Organize tasks at work or at home like an air traffic controller.
https://en.wikipedia.org/wiki/Flight_progress_strip
3
170
0
2358
updated November 18, 2023
Makes
Comments
@JayenneMontan_310396 Hi, there are STLs available, I just checked. Note: I still haven't corrected the alignment issue from another comment.
I need to buy 100 holders or more depending on the price. Please note price/holer. Parcel shall be sent to Egypt. Please respond to: mahdy1414@gmail.com. thanks
@DrMAHDY_292455 I don't sell, you can try to find a company in Egypt that does 3D printing and ask them for a price. Please be aware that the current version is a bit misaligned, see Dave's comment!
I've been having a hard time finding 7.5mm rod stock. Seems like 8mm is far more common. Think it will work with this print?
View one more comment
@dave818_12303 Oh, thanks! I'll have to fix that, I wanted to create a smaller and flatter version anyway.
@dave818_12303 No idea why my store has the 7.5 mm rods, I guess because that's 3/4 cm. Putting in 8mm holes should work as well.