Colorful C-3PO Portrait
Hi, you can also use other colors to create a different look. Show me some Makes :)
14
28
0
199
updated September 7, 2023
Description
PDFPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #6 (0.56mm) swap to Orange
At layer #10 (0.88mm) swap to Pink
At layer #11 (0.96mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.
Tags
Model origin
The author marked this model as their own original creation.
