Intellijel Case Stabilizers (Updated 2022-05-04: thicc ed.)

Update 2022-05-04:

Since, the old version was bit flimsy I made a thicker version. So far, they perform much better than the older version. See the download are for the newer versions (labeled as “thicc ed.”)

--------------------------------

After modifying a Yamaha piano bench so that it would hold my Intellijel 104HP/7U performance case, I quickly discovered that the case could fall off of the bench with the slightest push. My solution to this problem was to create stabilizers that utilize the built-in mounting slots on the case. These stabilizers click into the Intellijel case then screw into the table that is holding the case. For extra stability, I have included two stops for the rear feet on the case.

Once the case is mounted, it may be moved from the table by simply detaching stabilizers from the case using the releases built into the Intellijel case.

Included are the Fusion 360 files so that this thing may be modified as required..

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

20%

Filament:
Prusament PETG Orange 
 

Notes: 

I used PETG for strength and durability. PLA may work as well.

Category: Music