You have to print every pixel in the "desired" color. They are named and counted for easier printing for you.
E.g.: Block_red_42 → Print this block 42 times in red color :)
Use the picture as a reference to find the right position of the blocks. It took me around 15 mins to assemble.
There are two connector types in the files. I experienced that sometimes the tight fit once work good and sometimes the looser one - try first which one suits you best!
Have fun! :D
Warning:
Use 0.2 mm height for the pixels and the grid. Other nozzle sizes than 0.4 mm also can affect fitting. So always test before printing everything!
The author marked this model as their own original creation.