Raspberry PI mount for MyElectronics 2U dual itx case
A mount for an internal raspberry PI in a MyElectronics 2U dual itx case
3
10
0
266
updated September 5, 2023
Description
PDFThis is a mount I designed to fit a Raspberry PI 4 into my case (for PIKVM).
It's a pretty tight fit. It barely clears the headers of the motherboard and I had to use a right angle usb-c cable to get the usb to connect to the PI.
This requires two 3mm heat set inserts for the bottom holes, and self taping 2.5mm screws for the PI.
Model origin
The author marked this model as their own original creation.
