Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens
This lens hood fits Panasonic / Olympus 4/3rds lenses with bayonet hood mount.
To put the lens hood on, squeeze the hood opposite the ears.
The lens hood stays in place because of the springiness of the
plastic.
Notes:
DO NOT FORCE THE HOOD ON THE LENS TO MODIFY THE EARS. YOU WILL DAMAGE THE LENSE/CAMERA!
The hood's ears can be made thicker/thinner by adjusting the Z parameter in cura.
The hood's ears can be made thinner by sanding the small opening surface.
The hood is rough and will need to be sanded and trimmed.
Use a brim, NOT a raft or similar (or you will have to sand off the raft).
The stl has been fixed to be resized in cura to fit other Panasonic Lumix/Olympus 4/3s lenses.
Spraying it with flat black paint helps reduce glare
Barrel diameter for this lens: 49.3 mm
Lens Mounting Slot Thickness: 1.6 mm (approx)
Based on https://www.thingiverse.com/thing:39722
Lens hood for Zuiko 14-42 MSC II R lens Aµ4/3
by babr December 31, 2012
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
10%
Filament: eSun PLA+ Black
Notes:
Ender 3 Pro
Bed 66C
End 220C
Brim (not raft)
To avoid warping, allow it to cool before removing from bed.
Category: CameraThe author marked this model as their own original creation. Imported from Thingiverse.