HCW Hollow Inserts Optimized for 0.6 Nozzle
The original model is designed for 0.4 and does not easily print nicely with 0.6. This slightly adjusted model does.
32
112
0
1123
updated September 4, 2023
Description
PDFIncluded models are the single insert and the 4x insert. The thicknesses of the walls where the latching bits are have been slightly adjusted to better accommodate the wider lines size of a 0.6mm nozzle. See picture for results. The end product is somewhat stiffer than the original so be aware!
Tags
Model origin
The author remixed this model.
