OPnSense logo
An OPNsense logo to put on your virtualisation box. You can find my other HomeLab logos on my profile.
1
12
0
196
updated September 1, 2023
Description
PDFPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 4.6
PLA+ GST3D RED Transmission Distance: 3.5
PLA+ GST3D WHITE Transmission Distance: 4
Swap Instructions:
Start with BLACK
At layer #10 (0.88mm) swap to RED
At layer #13 (1.12mm) swap to WHITE for the rest.
Tags
Model origin
The author marked this model as their own original creation.
