4 color transition module

TL;DR

Fast complete 4 color transition test model to demonstrate the print quality and speed while going from any of the 4 colors to any other.

update 2023.0830

• added Zonestar Z9v5 M4

Collection

tools, 3D printing

Motivation

Reducing the waste of filament and print time while printing multiple filaments with a single hotend. There are several systems available to emulate a multi extruder with a single extruder also printers with several printheads and tool changers.

• 3D chameleon
• ams
• ERCF
• IDX
• mmu
• mosaic palette
• tool changers

(Uncomplete list in alphabetical order)

Let's get started

The 3MF folder contains ready to slice and print models for prusaslicer and bambustudio. Choose 4 filaments and go for it.

The model is a small square, just 8x8cm and 0.8 to 3.2 mm in thickness only a few grams of filament is needed. Just 4 to 16 layers and only 48 tool changes are needed. 

Layer Height: 0.2 mm, 100% infill done with top/bottom layers, each module has 4 layers.

You can save this prints as filament samplers / swatches that tell you how one filament goes over to any other one, by time you get a collection of all your filaments.

Help needed

It would be cool to add more data from other printers and filament changing systems.

Attribution

© yahbluez

Can I sell copies of this?

Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.

Donation

If you like to donate you can use  ko-fi or paypal. 
Money will be spend on filament and beer.

Filament used

PLA