Sovol SV06/SV06 Plus Ultimate PSU Cover 92mm

This is the ultimate psu cover for your SV06 or SV06 Plus. It allows you to install an external 92mm fan (I used the Arctic F9 with great results) and LM2596 voltage step-down converter to run the psu absolutely silently. This model has plenty of intake slots to eliminate air noise, and has threaded holes that accommodate the original M3 screws from the psu for maximum ease of installation. Fan voltage can be adjusted at any time from the outside of the machine. Fan should be mounted pulling air out of the psu. Prints without supports.

You will need:

1x 92mm fan (The Arctic F9 works great and is cheap)

1x LM2596 voltage converter (to step down 24v from psu to ~5v for silent fan operation)

2x 5-10mm length M3 screws (to mount the voltage converter to cover)

Some small wire to connect everything (I used breadboard jumper wires since they can plug directly in to the fan connector but also be soldered the the voltage converter and attached the the psu)

Optional, but recommended: purchase or print a fan grill to cover the outside of the fan