toolless Cable / Rope spool

Do you have a problem with lose wire? I have the solution for you!

This simple cable spool is easy to print and doesn't need any tools. A number of holes makes it easy to fix the cable in place. It has a diameter of 120mm, a width of 30mm and a center bore diameter of 30mm.

If you want to modify these dimensions you can take a look at the Fusion 360 (.f3d) file.

Print settings:

• Layer height: 0,2mm
• Outer walls/perimeters: 2
• Bottom layers: 3
• Top layers: 4
• Infill: 10%
• No supports