Artemis

Artemis filament painting using Hueforge.

From that point on, most of my models will be thicker and possibly take longer to print. Still trying to make my paintings look like sculpts, from my perspective if we want flat paintings we always have 2D printers, so let's make something unique :D

Recommend to use a tight brim to keep the model to the bed while printing.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA Overture Light Gray
• PLA+ Esun Bone White
• PLA+ Sunlu White

Swap Instructions:

• Start with Black
• At layer #7 (0.64mm) swap to Charcoal Black
• At layer #10 (0.88mm) swap to Cement Gray
• At layer #16 (1.36mm) swap to Grey
• At layer #18 (1.52mm) swap to Light Gray
• At layer #22 (1.84mm) swap to Bone White
• At layer #28 (2.32mm) swap to White for the rest.

Enjoy my work? Support me by joining my club. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.