Tuckstir

@Tuckstir

I Like Fun Knives. and this is Utility blade Knife fits the bill perfectly.

In the contest Office Accessories

163

386

2837

updated March 31, 2024

gusano

@Froggoat_387882

Joe

@Joe_224841

Nice design and prints quite easily.

Marc Bres

@MarcBres

Last_90

@Last_90_475764

very cool. thank you easy to print. I used 1-2 supports. As an update idea: you could possibly design it so that you can use a melt thread (edited)

Tuckstir

@Tuckstir

@Last_90_475764
thank you for the feedback, it is much appreciated.
I have thought about changing up the locking method, and would ideally like a method that does not require a fastener at all,

jacobcbab

@jacobcbab_402254

Thread required some sanding. I also added fuzzy skin.

Tsaro

@tsaro_150237

Vilkku Koo

@VilkkuKoo

what size blade does it use? i have 60mm, will it fit?

Ritzy3DPrinting

@RitirikGhosh

Great design, but the fit is a bit tight, required a bit of sanding to make the blade slide out, also the hinge screw b had to printed at 90%scale to have a tight fit.
one modification that can be done is make us of m3 nut and bolt to hold the blade in place

M 4

Metle

@Metle_1082670

Great model! It's really entertaining to flip around. I used fuzzy skin to elevate this model to the next level in my opinion.

Fuzzy Skin Point distance: 1.25
Fuzzy Skin thickness: 0.3

Chubby Knot

@chubby_knot

Thanks for the design! Printed with the newest step files and everything fits together perfectly. I didn't have any self tap screws so instead I heated an M3 and then drove it. Nice tight fit!