Prusa Enclosure electronik lock

Some time ago I checked what is not yet available on Printables. And that's when I noticed that there is no electronic lock for the Prusa Enclosure yet. And here it is. I designed it to be easily replicated. Even if you can't program, that's no problem. All you need is basic soldering skills and the right parts. You can find the instructions as a PDF under files. The sketch for the arduino is there too.

The parts needed are:

> a 4x3 keypad

>2x an electric lock (5V) 

>an Arduino Nano  

>Small cables 

>the 3d printed parts

>some small screws

> small cable ties

>9v power supply