I wanted to mount some lights and possibly a Pan/Tilt FPV camera on the roof. I didn't want to cut or glue to the original roof, so I designed a Roof Rack for it.
The Spacers are 4mm in height. If you need them to be longer just scale the Z axis. You will need 4 longer screws for the Roof Rack 3mm dia, and about 16-20 mm long, depending if you want to use nuts on the end of the screws.
Printed in PLA, about 40% fill.
Rafts:
No
Supports:
No
Infill:
40%
Category: OtherThe author marked this model as their own original creation. Imported from Thingiverse.