Blind Puzzle Box illuminated

So ... I printed the "Russian Doll Maze Puzzle Box" by RevK (https://www.thingiverse.com/thing:2410748), which is so much fun. Not too difficult not too easy. I brought it to my office and my colleagues enjoyed it very much. Then one of them stated that it is way too easy and he needs a challenge.
I went back to thingiverse and found the "Blind Puzzle Box" by Clarkerubber (https://www.thingiverse.com/thing:2178599).
I made a testprint ... found some issues with tolerances ... printed the "REMIX Blind Puzzle Box by Clarerubber" by The Fish (https://www.thingiverse.com/thing:2770314) ... made it even tighter ... combined it with the "Led with cr2032 battery support" by mgangat (https://www.thingiverse.com/thing:2812975) ... put some magnets in it and ... voilà. :-)

Additional parts I used were:

8x 8x3mm magnets (https://goo.gl/dhw5AN)
2x 15x1mm magnets (https://goo.gl/dKy5EP) (the one in the outer tube I put in during print .. I guess that's the easier way ;-) )
1x 5mm breathing LED (https://goo.gl/J54hQj)
1x CR2032 Battery (https://goo.gl/hPhKxq)

I'm not totally happy with the lightning solution. Maybe I will change that some day. But it works. :-)

Please give RevK, Clarkerubber,The Fish and last but not least mgangat some praise and love for their great work. :-)

Print instructions

Category: Puzzles Summary

So ... I printed the "Russian Doll Maze Puzzle Box" by RevK (https://www.thingiverse.com/thing:2410748), which is so much fun. Not too difficult not too easy. I brought it to my office and my colleagues enjoyed it very much. Then one of them stated that it is way too easy and he needs a challenge.
I went back to thingiverse and found the "Blind Puzzle Box" by Clarkerubber (https://www.thingiverse.com/thing:2178599).
I made a testprint ... found some issues with tolerances ... printed the "REMIX Blind Puzzle Box by Clarerubber" by The Fish (https://www.thingiverse.com/thing:2770314) ... made it even tighter ... combined it with the "Led with cr2032 battery support" by mgangat (https://www.thingiverse.com/thing:2812975) ... put some magnets in it and ... voilà. :-)

Additional parts I used were:

8x 8x3mm magnets (https://goo.gl/dhw5AN)
2x 15x1mm magnets (https://goo.gl/dKy5EP) (the one in the outer tube I put in during print .. I guess that's the easier way ;-) )
1x 5mm breathing LED (https://goo.gl/J54hQj)
1x CR2032 Battery (https://goo.gl/hPhKxq)

I'm not totally happy with the lightning solution. Maybe I will change that some day. But it works. :-)

Please give RevK, Clarkerubber,The Fish and last but not least mgangat some praise and love for their great work. :-)

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

</div>Rafts:

No

Supports:

No

</div>Resolution:

0.2mm

Infill:

10%

</div>
Filament:
[

Fillamentum / Innofil PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Fillamentum+%2F+Innofil+PLA&tag=tvad0304-20) Vertigo Galaxy / Orange Translucent Post-Printing

Well ... magnets and the battery holder are a tight fit ... also the battery cover may need some sanding. But I guess it depends on your printer.