A 3 part enclosure for LM2596 DC-DC converter series.
The LD2596 module's main task is to provide a lower voltage for a secondary circuit. For example from a 3D printer main power supply, from the 12-24vDC main power to the 5.3vDC required by a RaspberryPi. The LM2596 module is also usefull for temporary bread board alike circuits with its fast and easy monitored setup. It can be usefull too in a fixed setup to monitor input/output power voltage.
Features :
Required hardware :
Not affiliated links :
LM2596 module : https://fr.aliexpress.com/item/4000013423897.html?spm=a2g0s.12269583.0.0.21418af2cEuJCi
Printer:
Reprap
Rafts:
No
Supports:
No
Resolution:
Any
Infill:
High
Filament:
Plasti Mladec PLAKhaki + Orange
Notes:
Please note the supports are already embed in the model.
I recommend to print the push button simulteaneously with another parts to avoid overheating. The perfect fit is reachable with correctly calibrated printers only.
The parts are optimized for 0.5mm nozzle and thinner nozzles, 3 perimeters and 0.8mm base/top layers.
Remove supports
Use an utility knife to remove suports on the cover, to release the flush screw holes.
Category: HobbyThe author marked this model as their own original creation. Imported from Thingiverse.